rtv silicones by 1-part adhesive sealant rtv106 primary characteristics red paste high temperature rated acetoxy cure meets mil-a-46106 ul file no. e-36952 fda 21 cfr 177.2600 excellent for insulating, sealing, bonding and formed-in-place gaskets. can be applied to vertical and overhead surfaces. not for use in delicate electrical and electronic applications in which corrosion of copper, brass, or other sensitive metals is undesirable. can be used in food contact applications where fda regulations apply. reference cds4319 "food contact applications", "silicone rubber compounds." available sizes catalog no. size description rtv106-85ml 2.8 oz tube RTV106-300ML 10.1 oz cartridge specifications use adhesive sealant special feature high temperature standards fda 21cfr 177.2600 mil-a-46106 ul recognized ul file no. e-36952 ul 95 hb cross reference rtv106, dc732 uncured properties consistency paste color red specific gravity 1.07 tack free time 25 min cure through time ( 77f / 50% relative humidity / 1/8" thick) 24 hours cure time (@ 77f /50% relative humidity) 3 days useful temp. range -60c to 260c (-75f to 500f) cured properties - mechanical hardness 30 (shore a) tensile strength 2.55 mpa (375 psi) elongation 400% tear strength 7 kg/cm (40 lb/in)
peel strength 7 kg/cm (40 lb/in) cured properties - electrical volume resistivity 3 x 10 14 ohm cm dielectric strength 19.7 kv/mm (500 v/mil) dielectric constant 2.8 @ 60 hz cured properties - thermal thermal conductivity 0.2092 w/m k brittle point -60c (-75f) thermal expansion 27 x 10 -5 (c) -1 other viscosity (@ 25c) 400 g/min ? 2000 - 2007 mg chemicals. all rights reserved.
|